MASTER Traveller Set
JUICE BOOSTER 3 air
- Activation via RFID, automatic adapter recognition, integrated dynamic load management for up to ten devices
- j+ pilot app for monitoring charging and for controlling the device remotely or on a schedule
- Integrated residual current device for protection against DC and AC fault currents, detailed fault detection, and detection of incorrectly wired sockets or excessive current consumption
- Extremely sturdy design: dustproof and waterproof, temperature resistant, and can withstand being driven over
- Set includes 9 adapters: Typ-2 400V, CEE32 400 V, CEE32 230 V, CEE16 400 V, CEE16 230 V, Typ G 230 V (GB), Typ L 230 V (IT), Schuko 7/7 230 V, T13 230 V (over 30 adapters available in total), 2 security locks, extension cable 5m
The JUICE BOOSTER 3 air is a versatile charging solution for electric vehicles with a Type 2 vehicle inlet. In addition to being versatile and multi-functional, the JUICE BOOSTER 3 air is also extremely smart, with app control, RFID activation, integrated load management, and a logbook with receipt function. With an output power of up to 11 kW, the device can charge e-vehicles from virtually any conventional household or industrial socket worldwide – and always with maximum speed, safety and convenience. Thanks to the specially developed inlet adapters and the extensive range of safety devices, it is impossible to operate the device incorrectly.
Smart technology with the same sturdy design you’ve come to expect
The JUICE BOOSTER 3 air is smaller, lighter, smarter and more connected than other mobile charging stations. With the optional wall bracket (available separately), the mobile charging station can also be used as a wall box. With over-the-air update capability, the device can be adapted to keep pace with future requirements, and to update it with additional features. The mobile charging station is completely dustproof and waterproof (IP67), safe to drive over with a wheel load of up to 3 tonnes (IK10), feather-light with a weight of 700 g, and compatible with all electric cars that have a Type 2 vehicle inlet. It features detailed fault current detection and even registers incorrectly wired sockets or when the car draws more current than it should. Thanks to the integrated residual current device (RCD), there is also no need to install an expensive type B RCD in your home.
Dimensions | Diameter: 53 mm, Length: 213 mm |
Weight | ca. 700 g excluding cable; 1.8 kg with cable and connector |
Input current | 230 V, 6–16 A (single phase) or 400 V 6–16 A (3-phase) AC |
Power output | Depends on input current: 1.4 – 11 kW AC |
Colour | Metallic anthracite Cable: black |
Operating temperature | -30°C to +50°C |
CE conformity | IEC 62752, 62196, 61851, Mode 2/3, EMC, RoHS |
Protection rating – FI – safety | IP67 - RCD DC 6 mA, AC/DC 30 mA |
Mains-end plug | via 25 self-detecting adapters available for household, industrial and EV sockets, cable 1.4 m + adapter approx. 30 cm |
Vehicle-end connector | Type 2 (IEC 62196), Cable length: 3.1 m |
The JUICE BOOSTER 3 air is a versatile charging solution for electric vehicles with a Type 2 vehicle inlet. In addition to being versatile and multi-functional, the JUICE BOOSTER 3 air is also extremely smart, with app control, RFID activation, integrated load management, and a logbook with receipt function. With an output power of up to 11 kW, the device can charge e-vehicles from virtually any conventional household or industrial socket worldwide – and always with maximum speed, safety and convenience. Thanks to the specially developed inlet adapters and the extensive range of safety devices, it is impossible to operate the device incorrectly.
Smart technology with the same sturdy design you’ve come to expect
The JUICE BOOSTER 3 air is smaller, lighter, smarter and more connected than other mobile charging stations. With the optional wall bracket (available separately), the mobile charging station can also be used as a wall box. With over-the-air update capability, the device can be adapted to keep pace with future requirements, and to update it with additional features. The mobile charging station is completely dustproof and waterproof (IP67), safe to drive over with a wheel load of up to 3 tonnes (IK10), feather-light with a weight of 700 g, and compatible with all electric cars that have a Type 2 vehicle inlet. It features detailed fault current detection and even registers incorrectly wired sockets or when the car draws more current than it should. Thanks to the integrated residual current device (RCD), there is also no need to install an expensive type B RCD in your home.
Dimensions | Diameter: 53 mm, Length: 213 mm |
Weight | ca. 700 g excluding cable; 1.8 kg with cable and connector |
Input current | 230 V, 6–16 A (single phase) or 400 V 6–16 A (3-phase) AC |
Power output | Depends on input current: 1.4 – 11 kW AC |
Colour | Metallic anthracite Cable: black |
Operating temperature | -30°C to +50°C |
CE conformity | IEC 62752, 62196, 61851, Mode 2/3, EMC, RoHS |
Protection rating – FI – safety | IP67 - RCD DC 6 mA, AC/DC 30 mA |
Mains-end plug | via 25 self-detecting adapters available for household, industrial and EV sockets, cable 1.4 m + adapter approx. 30 cm |
Vehicle-end connector | Type 2 (IEC 62196), Cable length: 3.1 m |
Charging accelerator incl. wall mount